Product Code : 18
Price And Quantity
- Minimum Order Quantity
- 1 Unit/Units, ,
- Price Range
- 30000.00 - 400000.00 INR
- 240 Volt (v)
- Operate Method
We have achieved high acclamation in the industry for offering a top-of-the-line gamut of Rapid Plastimeter. We source high end quality of components from trusted vendors of the market to manufacture these equipments in compliance with industrial standards. Available in different specifications, these equipments are highly used for determination of plasticity of unvulcanized raw rubbers. The demand of our offered Rapid Plastimeter is increasing at a rapid pace as these are easy to use and sturdy in construction.
Dimensions of upper anvils
7.3 mm, 10.0 mm, and 14.0 mm dia - 4.5 mm thickness
IS 3660 (Part 11) - 1989
Methods of Test for Natural Rubber
Part 11 : Determination of Plasticity
BS:903 : Part A59 -1990
Physical Testing of Rubber
Part A59 - Method using Plastimeter
ASTM D3194 - 99
Standard Test Method for Rubber from National Sources Plasticity Retention Index (PRD)
A rapid plastimeter is commonly used for simple and quick determination of plasticity of unvulcanized and raw rubbers. It is very simple in operation and does not need any special skill or judgement for obtaining reliable values of plasticity. This equipment can also be used for testing polyurethane.
The PROLIFIC Rapid Plastimeter consists of a pair of parallel circular platens of smooth flat surface movable in relation with one another. Both the platens are heated with the help of individual electric heaters so that the material being tested and the area surrounding it can be maintained at test temperature of 100 oC. The temperature is controlled with the help of individual temperature indicator cum controllers.
Both the platens are made of chrome plated bronze with lower platens having provisions of holding stainless steel anvils. Three anvils are provided to cover a wide range of plasticity.
In the Manual Model, a manually operated lever rapidly moves down the upper platen for compressing the specimen to an initial thickness of 1.00 mm through a cam operated loading arrangement. A dead weight and lever arrangement applies the test load on the specimen through the lower platen. A dial gauge indicator is provided to continuously monitor the thickness of the test specimen.
In the Automatic Model, a pneumatic cylinder rapidly moves down the upper platen for compressing the specimen to an initial thickness of 1.00 mm. The specified test load is then applied on the specimen automatically through the lower platen after the specified duration with the help of a dead weight and another pneumatic cylinder. The thickness of the specimen during the test is indicated on a digital thickness meter with the help of a LVDT. The reading of the display of thickness is frozen at the end of the test duration. The timing for pre-heating and test duration are indicated and controlled with the help of a double display electronic timer. The whole testing is totally automatic. The compressed air line with air pressure of 7 kg / cm2 or higher is to be provided by the user. A motor operated compressor with pressure switch is available as optional accessory.
An arrangement for compensating for the thickness of tissue paper is provided, which is carried out only when there is any change in the thickness of tissue paper used.
The various components are fixed on a steel fabricated panel with various digital indicators fitted in front of the same. The panel is finished in grey enamel paint. Various components are bright chrome / zinc plated to give them a corrosion resistant finish.
A punch for preparing test specimen of required size is available as an optional accessory.
- Payment Terms
- Telegraphic Transfer (T/T), Cheque
- Supply Ability
- 10 Per Month
- Delivery Time
- 3-4 Months
- Main Export Market(s)
- Africa, Middle East, Western Europe, Eastern Europe, South America, North America, Central America, Australia, Asia
- Main Domestic Market
- All India